| Valve Type ID | 4084d8fb-7c9e-4eb6-b048-aabe0d6cc2f2 |
|---|---|
| Size Range | DN400-DN2000 |
| Pressure Rating | PN1.0-PN4.0 |
| Temperature Range | -20°C to 300°C |
| Body Material | cast steel |
| Trim Material | PTFE |
| Seal Material | ceramic |
| Stem Material | duplex steel |
| End Connection | threaded |
| Standard | API |
| Operation Method | gear |
| Flow Coefficient (Cv) | 1092.42 |
| Leak Rate | ANSI Class VI |
| Applicable Media | steam |
| Applications | steam |
| Industry Tags | military |
| Test Pressure | 240 |
| Design Pressure | 4 |
| Design Standard | API |
| Design Temperature | 300 |
| Body Material Grade | WC9 |
| Weight (kg) | 684 |
Globe valves are linear-motion valves intended for throttling and regulating flow, at the cost of higher pressure drop than gate or ball valves. Selection focuses on trim type, flow-characteristic (linear/equal-percentage), body pattern (Z, Y, angle), and material compatibility for the service.
Q: What is a globe valve used for?
A: Globe valves are used where flow regulation or throttling is required. They provide good shutoff and controllability but introduce a higher pressure drop than isolation-style valves.
Q: Which standards govern globe valves?
A: Common references include API 600 and BS 1873 for steel globe valves.
Guidance reflects general engineering practice for globe valves; confirm against the project specification and applicable standards before procurement.
Compare Globe Valves models side by side, download datasheets, and browse the verified supplier directory. Upgrade to Pro for the complete technical dataset.
View Pro Membership