| Valve Type ID | 89e21c7c-3d9c-48f3-8b6b-a876df2f3314 |
|---|---|
| Size Range | DN40-DN120 |
| Pressure Rating | PN4.0-PN8.0 |
| Temperature Range | -20°C to 400°C |
| Body Material | plastic |
| Trim Material | alloy steel |
| Seal Material | PTFE |
| Stem Material | titanium alloy |
| End Connection | ferrule |
| Standard | DIN |
| Operation Method | gear |
| Flow Coefficient (Cv) | 1367.68 |
| Leak Rate | ANSI Class VI |
| Applicable Media | corrosive media |
| Applications | corrosive media |
| Industry Tags | pharmaceutical |
| Test Pressure | 124 |
| Design Pressure | 8 |
| Design Standard | DIN |
| Design Temperature | 400 |
| Body Material Grade | LCA |
| Weight (kg) | 1084 |
Steam traps discharge condensate and non-condensable gases while retaining live steam. Selection depends on the trap type (mechanical, thermodynamic, thermostatic), load, pressure, and whether continuous or intermittent drainage is required. Proper sizing prevents premature failure and energy loss.
Q: What is a steam trap used for?
A: A steam trap removes condensate and air from steam systems while preventing live steam loss, improving energy efficiency and protecting equipment.
Q: What are the main steam trap types?
A: The three families are mechanical (float), thermodynamic (disc), and thermostatic (bellows/bimetallic), each suited to different load and pressure conditions.
Guidance reflects general engineering practice for steam traps; confirm against the project specification and applicable standards before procurement.
Compare Steam Traps models side by side, download datasheets, and browse the verified supplier directory. Upgrade to Pro for the complete technical dataset.
View Pro Membership